Hitachi P50XR01E User Manual page 28

CONNECTION (continued)
Connecting Procedure (continued)
Photo Input terminal can be connected to a digital still camera or USB card reader with USB cable. For details, refer
to the Photo Input function shown on
IN
NOTE
This photo input terminal does not support general USB devices such as USB memory.
Please do not connect with those devices.
SD Memory Card slot can be used for the Photo Input function with the SD (or
MMC) card memory containing pictures. For details, refer to the Photo Input function
86 90
shown on ~ .
4. Connecting the plug into the wall socket
Connect the Power Cord after completing all other connections.
(The type of plug is different from this drawing for some countries.)
UK only
Except UK
CAUTION
Use only the Power Cord provided.
Do not use a power supply voltage other than that indicated (AC220-240V, 50Hz). It may cause fi re or electric shock.
For the plasma television, a three-core power cord with a ground terminal is used for effi ciency protection. Always be
sure to connect the Power Cord to a grounded outlet and make sure that the cord is properly grounded. If you use a
power source converter plug, use an outlet with a ground terminal and screw down the ground line.
Connection to a Cable Distribution System is to be provided through a galvanic isolator.
Ensure that both ends of power cord are easily accessible.
If you have to change the power cord, please use the certifi ed power cord that meets your region's safety standard.
86 ~ 90 .
OUT
[Example]
Digital Camera
USB Card reader
SD Card / MMC
27