Zoom; Marker Search; Checking The Contents Of Dvd Video Discs: Menus; Title Menu - Hitachi DV-RV8500E Instruction Manual

Operation with DVD and Video CD (Continued)
General Features (continued)

Zoom

RAM Video VR
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1. Press ZOOM during playback or still playback to
activate the Zoom function.
Each press of the ZOOM button changes the TV screen in
the sequence shown below.
x1 size → x2 size → x4 size → x1 size (normal size)
2. Use the 2 1 3 4 buttons to move through the
zoomed picture.
3. To resume normal playback, press CLEAR or press
ZOOM repeatedly until the normal picture appears.
ote
The zoom function may not work for some DVDs.
MARKER

Marker Search

RAM Video VR
You can start playback from a memorised point. Up to
six points can be memorised.
To enter a mark, follow these steps.
1. During disc playback, press MARKER when
playback reaches the spot that you want to
memorise.
The Marker icon will appear on the TV screen briefly.
2. Repeat step 1 to enter up to six Marker points on a
disc.
To Recall a Marked Scene
1. Press SEARCH.
The Marker Search menu will appear on the TV screen.
2. Use the 2 1 3 4 buttons to select a Marked scene
that you want to recall.
3. Press ENTER.
Playback will start from the Marked scene.
4. To remove the Marker Search menu, press
RETURN (@).
Marker Search
Move Select
To clear a Marked Scene
1. Press SEARCH during playback or in stop mode.
The Marker Search menu will appear on the TV screen.
2. Use 2 1 3 4 to select the Marked scene that you
want to erase.
+RW +R DVD
1 / 6
+RW +R DVD
CLEAR Delete Close
3. Press CLEAR.
"Delete selected marker? Continue?" message appears.
4. Use 2 / 1 to select "Yes" then press ENTER.
5. Repeat steps 2-4 to erase additional Marked scene.
6. To remove the Marker Search menu, press
RETURN (@).
ote
Removing the disc will erase the marker.
Checking the Contents of DVD Video Discs:
Menus
DVDs may contain menus that allow you to access
special features. To open the disc menu, press DISC
MENU / LIST. Then, press the appropriate number
button to select an option. Or, use the 2 1 3 4
buttons to highlight your selection, then press ENTER.

Title Menu

DVD
Press TITLE MENU.
If the current title has a menu, the menu will appear on the TV
VCD
screen. Otherwise, the disc menu may appear.
• The menu may contain camera angles, spoken
language and subtitle options, and chapters for the
title.

Disc Menu

DVD
Press DISC MENU / LIST.
The disc menu is displayed.
• To remove the disc menu, press DISC MENU / LIST
again.

Camera Angle

If the disc contains scenes recorded at different camera
angles, you can change to a different camera angle
during playback.
• Press ANGLE then press 2 / 1 repeatedly during
playback to select a desired angle.
The number of the current angle appears on the TV screen.
ip
The ANGLE indicator will blink on the TV screen at
scenes recorded at different angles to indicate that
angle switching is possible.

Changing the Audio Soundtrack

5.1CH
1. ENG
Press AUDIO then press 2 / 1 repeatedly during
playback to hear a different audio language or audio
soundtrack if available.
ote
Some discs feature both Dolby Digital and DTS
soundtracks. There is no analogue audio output when
DTS is selected. To listen to the DTS soundtrack,
connect this recorder to a DTS decoder via one of the
digital outputs. See page 17 for connection details.
DVD
1/3
DVD
35