Before Operation; Initial Settings; General Operation; General - Hitachi DV-RV8500E Instruction Manual

Before Operation

Initial Settings

In this menu system, there are several ways to
customise the settings provided. Most menus consist of
three levels to set up the options, but some require
greater depth for the variety of settings. If you press
SETUP, only the first and second level of the menu
system will appear on the TV screen. The third level can
be displayed by pressing 1. For navigating the menu
levels, you will see "1" on the right side of the menu
label to help you go to the next level.
To bring up and exit the Menu:
Press SETUP to bring up the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level:
Press 1 on the remote control.
To go back to the previous level:
Press 2 on the remote control.

General Operation

Press SETUP.
1 1
The Setup menu appears.
Use 3 / 4 to select the desired option.
2 2
While the desired item is selected, press 1 to
3 3
move to the second level.
Use 3 / 4 to select the second desired option.
4 4
Press 1 to move to the third level.
5 5
Use 3 / 4 to select the desired setting then
6 6
press ENTER to confirm your selection.
Some items require additional steps.
Press SETUP to exit the Setup menu.
7 7
otes
• Press 2 to go back to the previous level.
• The Setup menu screen will not automatically
disappear once it is displayed. Therefore, if you do not
operate the recorder for a long period of time, press
the SETUP button to switch off the menu in order to
prevent burning out the screen.

General

Auto Programming

This Recorder is equipped with a frequency
synthesised tuner capable of receiving up to 99 TV
channels.
Preparation:
• Connect the Recorder to the desired type of aerial, as shown
in Connecting to the Aerial on page 15.
Auto Programming
Program Edit
Clock Set
TV Aspect
VCR Play Aspect
VCR Play System
AV2 Connection
Progressive Scan
Factory Set
Press SETUP.
1 1
The Setup menu appears.
Use 3 / 4 to select the General option.
2 2
While the General option is selected, press 1 to
3 3
move to the second level.
Use 3 / 4 to select the Auto Programming
4 4
option.
Press 1 to move to the third level.
5 5
"Start" icon is highlighted.
Press ENTER to begin the channel search.
6 6
The tuner will automatically cycle through all
available channels in the area and place them in the
tuner's memory.
Start
19