Table of Contents
Advertisement
Press the 21 buttons to select Yes, and
6
then press the OK button.
• The selected entry will be deleted from the list.
Press the MENU button after finishing
7
the operation. The menu screen will
disappear.
44 - English
Using the VIDEO Plus+
Feature
Before presetting your DVD Recorder:
• Switch on both the television and your DVD Recorder
• Check that the date and time are correct
Up to 12 programmes can be preset.
Enter a VIDEO Plus+ button. Press the
1
34 and OK or 1 buttons to select
VIDEO Plus+.
• A message is displayed to allow you to enter the
VIDEO Plus+ code.
• If all 12 programmes have been set, the message
'Timer is full' is displayed. Refer to page 43 if you
wish to cancel a preset recording.
DVD-RAM(VR)
VIDEO Plus + Record
Standard Timer
VIDEO Plus + Record Extended : Off
MOVE
OK
Press the numeric buttons to enter the
2
code of the programme that you wish to
record in your television magazine.
If you wish to correct the VIDEO Plus+ code that
you are entering:
• Press the 2 button until the digit to be corrected
is cleared.
• Enter the correct digit.
DVD-RAM(VR)
Enter VIDEO Plus+ Code number.[0~9]
OK
Program
RETURN
EXIT
Program
RETURN
EXIT
Advertisement
Table of Contents
