Table of Contents
Advertisement
Setting Up NICAM
Options
NICAM programmes are divided into 3 types. NICAM
Stereo, NICAM Mono and Bilingual (transmission in
another language). NICAM programmes are always
accompanied by a standard mono sound broadcast
and you can select the desired sound by setting
NICAM on or off.
With the unit in stop mode, press the
1
MENU button on the remote.
Select "Setup" using 34 buttons, then
2
press the 1 or OK button.
DVD-RAM(VR)
System
Language
Audio
Video
Parental Control
MOVE
OK
Using the 34 buttons, move the
3
selection bar to "System" then press 1
or OK to select.
DVD-RAM(VR)
Clock Set
Install
CM Skip Time
AV 1 Output
NICAM
MOVE
OK
Using the 34 buttons, move the
4
selection bar to "NICAM" then press 1
or OK to select.
Using the 34 and OK buttons, select
5
"On" or "Off".
• Off: Only set at this position to record the standard
mono sound during a NICAM broadcast if the
stereo sound is distorted due to inferior
reception conditions.
• On: NICAM mode
Setup
√
√
√
√
√
RETURN
EXIT
System
: 15 Sec
: Video
: On
RETURN
EXIT
Setting Up SCART Jack
Options
If you connect external device (VCR/satellite
receiver/cable box) or TV to DVD Recoder with Scart
Jack (21-pin), you need to set this option.
With the unit in stop mode, press the
1
MENU button on the remote.
Select "Setup" using 34 buttons, then
2
press the 1 or OK button.
Using the 34 buttons, move the
3
selection bar to "System" then press 1
or OK to select.
DVD-RAM(VR)
System
Language
Audio
Video
Parental Control
MOVE
OK
Using the 34 buttons, move the
4
selection bar to "AV1 Output" then press
1 or OK to select.
DVD-RAM(VR)
Clock Set
Install
CM Skip Time
AV 1 Output
NICAM
MOVE
OK
Using the 34 and OK buttons, select
5
"Video" or "RGB" to suit the AV terminal
of TV.
• AV2 input option will be set automatically according
to the signal of external device (VCR/satellite
receiver/cable box).
Setup
RETURN
EXIT
System
: 15 Sec
: Video
:
RETURN
EXIT
English - 29
Advertisement
Table of Contents
