Plug & Auto Set Up - Hitachi DV-RX7000E Instruction Manual

Plug & Auto Set up
Your DVD Recorder will automatically set itself up
when it is plugged in for the first time. TV stations and
clock will be stored in memory. The process takes a
few minutes. Your DVD Recorder will then be ready for
use.
Connect the coaxial cable as indicated
1
on page 15.
(Connecting Your DVD Recorder to the TV using the
Coaxial Cable)
Plug the DVD Recorder in.
2
Press a Number button to select the
3
language.
Start the auto setup.
4
Auto setup will be started.
Check antenna and TV cable connection.
OK
Auto Channel scan will be started.
5
Channel scan
Now, Scanning.
• The number of stations automatically stored by the DVD
Recorder depends on the number of stations that it has
found.
24 - English
Cancel
5%
Start ACS (Auto Clock Setting) when Auto
6
Channel scan is completed.
Auto channel scan completed successfully.
Press [OK] button to auto clock set.
OK
Wait until current date and time are
7
displayed automatically. If you want to
exit Auto clock setting, press MENU
button.
Please wait, Now setting the clock.
If you want to exit clock setting,
press the [MENU] button.
Check the date and time.
8
DVD-RAM(VR)
Time Date
12 : 00 01
Auto Clock :
MOVE OK
• If it is correct, press OK then the date and time will be
saved.
• If it is incorrect, input correct Time, Date, Year using
navigation 342 1 buttons or number button.
Press OK then the date and time will be saved.
When you need to change clock setting, you can set up
it manually. (See page 25)
■ Now, DVD-Recorder is ready for use. Function for
"Plug & Auto Set Up" is fixed already. So if you
NOTE
want to change this fixed one, you can change it
by Presetting the Stations in OSD "Manual Setup"
menu. (See page 27)
Cancel
Clock Set
Year
THU
JAN 2004
Off
RETURN EXIT