Initialization; Factory Set; Hdd Format - Hitachi DV-DS163E Service Manual

Details of Servicing and Troubleshooting > Initialization

3-2 Initialization

Information:
All this procedure can be executed by operating the buttons on remote control: Prepare the remote
control.

3-2-1 Factory Set

Execute Factory Set to return the items that have been set after
unpacking to the factory defaults.
1) Press the SETUP button on remote control.
2) Use the cursor up and down buttons to choose "Initialization" and
press the cursor right button.
3) Use the cursor up and down buttons to choose "Factory Set" and
press the ENTER button.
4) Follow the instructions on screen hereafter to return the various
settings to the factory defaults.

3-2-2 HDD Format

Execute HDD Format to delete all recorded data on HDD.
Be sure to execute this item after replacing a HDD so that the new
HDD will be usable.
1) Press the SETUP button on remote control.
2) Use the cursor up and down buttons to choose "Initialization" and
press the cursor right button.
3) Use the cursor up and down buttons to choose "HDD Format" and
press the ENTER button.
4) Follow the instructions on screen hereafter to format the HDD.
3 - 2
Auto Programming
Program Edit
Clock Set
TV Aspect
Display Mode
AV2 Connection
Factory Set
Power Save Mode HDD Format
Initialization
M/C Format
Prov.
Move Select
Fig. 3-2-1 Factory Set
Auto Programming
Program Edit
Clock Set
TV Aspect
Display Mode
AV2 Connection
Factory Set
Power Save Mode HDD Format
Initialization
M/C Format
Prov.
Move Select
Fig. 3-2-2 HDD Format