Finding and Adding New DAB Stations
Touch and hold
on the display.
The radio will scan the DAB channels and add any new stations
available to the station list.
How to search DAB Radio Stations Manually
1. Touch and hold
2. Display will show the current channel number and
frequency.
Turn the Tuning Knob to step between the channels, when
the desired channel appears, stop turning.
Note: If there is a multiplex corresponding to this channel number
and frequency the display will show the multiplex name, and a
tuning meter showing the signal strength.
3. Touch
again to exit.
To Show the Signal Strength in DAB mode
Repeat touching
shows a signal bar with the strength of the current station.
The indicator on the signal bar shows the minimum required signal level.
Note:
with signal strength below this level will not provide a steady stream of audio.
10
until Autotune Full scan appears
to enter Manual Tune.
until the LCD screen display
Stations