Download Print this page

Advertisement

Cordless Radio
Model UR 18DSL
Handling instructions
Note:
Before using this cordless radio, carefully read through these HANDLING
INSTRUCTIONS to ensure effi cient, safe operation. It is recommended that these
INSTRUCTIONS be kept readily available as an important reference when using
this cordless radio.

Advertisement

   Summary of Contents for Hitachi UR 18DSL

  • Page 1

    Cordless Radio Model UR 18DSL Handling instructions Note: Before using this cordless radio, carefully read through these HANDLING INSTRUCTIONS to ensure effi cient, safe operation. It is recommended that these INSTRUCTIONS be kept readily available as an important reference when using...

  • Page 2

    &...

  • Page 3

    fi re. Inspections and repairs should be performed by the 17. When rechargeable battery is not in use, keep it store where purchased or by a Hitachi power tool away from other metal objects like paper clips, service center.

  • Page 4: Specifications

    AC adapter (DC 12 V 1 A), three AA batteries NOTE: Rechargeable battery Most rechargeable batteries for Hitachi power tools can be used with this radio, except for the following. 3.6 V, 7.2 V, 10.8 V and 24 V and over...

  • Page 5: Inserting The Backup Batteries

    ● Attaching the AC Adapter SERVICE TIME PER BATTERY CHARGE The provided AC adapter can be used to power the radio Battery capacity Service time* from an electric socket. Pull back the rubber cover and connect the AC adapter to 1.3 Ah Approx.

  • Page 6: Auto Select

    Loading a plug-in battery (Fig. 4) NOTE Insert the battery into the space in the radio body as far as ○ The display changes in the order of [FM→AM→AUX→FM] it will go before securing with the belt. each time the band select button is pressed. If the belt is not the right length, adjust the length of the 3.

  • Page 7: Connecting An External Device

    Positioning Buzzer Alarm Reception may be poor when the radio is used inside a To turn off the buzzer alarm, press the FM mode / alarm vehicle or building. When inside a building, place the radio button. If it is not turned off , the buzzer will continue to near the window to ensure better reception.

  • Page 8

    By factory default setting, the voice message function plays “Welcome to Hitachi Power Tools” when the power is turned on and “Presented by Hitachi Power Tools” when the power is turned off . To mute the voice messages, press memory button 1 while the power is turned off...

  • Page 12

    Shinagawa Intercity Tower A, 15-1, Konan 2-chome, Minato-ku, Tokyo, Japan Code No. C99181811 A Printed in China...

Comments to this Manuals

Symbols: 0
Latest comments: