Dab Operation; Full Scan; Manual Tuning - Hitachi KHD101E Instruction Manual

DAB Operation

If the unit is connected to the mains power for the first time, the unit will
show "Welcome to Digital Radio" and then perform auto scan. During
the scan the display will show "Scanning..." together with a slide bar that
indicates the progress of the scan and the number of stations that have
GB
been found so far.
Once the scan has finished, the unit will broadcast the first
alphanumerically found station. To explore the found stations, press
and then Enter button to confirm selection.

Full Scan

The full scan will search for the entire DAB Band III channels. After the scan
has finished, the first alphanumerically found station will be automatically
broadcast.
Full scan will not replace the DAB stations in memory. If you want to
remove all the previously scanned stations, factory reset is required.
1. To activate full scan, press Menu then
Press Enter to confirm. The display will show "Scanning..." and a
progressing slide bar.
2. All the stations that have been found will be stored automatically. To
explore and listen to the found stations, press
button to confirm selection.

Manual Tuning

Manual tuning can help add stations that were missed by full scan.
1. Press Menu and then
confirm.
2. Press
from 5A to 13F.
3. Press Enter to select the station that you would like to listen to.
20
/
/ to scroll through the DAB channels, which are numbered
to select <Full scan>.
/
to select <Manual tune>. Press Enter to
and then Enter
/
/