Software Version
Press MENU and then
1.
Press
2.
Press
confirm.
GB
Press MENU to exit.
3.
DAB Operation
If the unit is connected to the mains power and then switched
on for the first time, the unit will automatically enter into the
DAB mode and perform auto scan. During the scan the display
will show "Scanning ..." together with a slide bar that indicates
the progress of the scan and the number of stations that have
been found so far.
Once the scan has finished, the unit will select the first
alphanumerically found station. To explore the found stations,
press
Full Scan
The full scan will search for the entire DAB Band III channels.
After the scan has finished, the first alphanumerically found
station will be automatically selected.
Full scan will not replace the DAB stations in memory. If you want to
remove all the previously scanned stations, factory reset is required.
16
to confirm.
repeatedly to select <SW version>. Press
and then
to confirm selection.
repeatedly to select <System>.
to