Finding And Adding New Dab Stations; How To Search Dab Radio Stations Manually; To Show The Signal Strength In Dab Mode - Hitachi KH 312 Instruction Manual

Finding and Adding New DAB Stations

Touch and hold until Autotune Full scan appears on the
display.
The radio will scan the DAB channels and add any new stations
available to the station list.

How to search DAB Radio Stations Manually

1. Touch and hold
2. Display will show the current channel number and
frequency.
Turn the Tuning Knob to step between the channels, when
the desired channel appears, stop turning.
Note: If there is a multiplex corresponding to this channel number
and frequency the display will show the multiplex name, and a
tuning meter showing the signal strength.
3. Touch again to exit.

To Show the Signal Strength in DAB mode

Repeat touching until the LCD screen display shows a
signal bar with the strength of the current station.
The indicator on the signal bar shows the minimum required signal level.
Note:
with signal strength below this level will not provide a steady stream of audio.
10
to enter Manual Tune.
Stations