Hitachi PW2 42PD7A10A User Manual page 39

OPERATING INSTRUCTIONS (continued)
PICTURE MENU (TV/Video mode) (continued)
Selected characters
Picture Mode
Contrast
Brightness
Colour
Sharpness
Hue
Colour Temperature
Contrast Mode
Reset
YNR
CNR
Film Mode
PAL Comb Filter
LTI
CTI
Black Enhancement
Auto Colour
Colour Temp. Adjustment
Red
Amplitude Green
Blue
Red
Green
Cut Off
Blue
38
Dynamic Natural
Narrows the gap between Broadens the gap between
brightness and darkness. brightness and darkness.
Black is subdued for Black is set off for increased
increased overall darkness. overall brightness.
Decrease colour intensity. Increase colour intensity.
Soft Sharp
Enhances red and weakens Enhances green and weakens
green. red.
Cool Normal Warm
Normal Auto
(off the function) (waiting to reset)
Off Low
Off
Off
Off Low Middle
Off
Off
Brighter scene is decreased Brighter scene is increased in
in reddish colour. reddish colour.
Brighter scene is decreased Brighter scene is increased in
in greenish colour. greenish colour.
Brighter scene is decreased Brighter scene is increased in
in bluish colour. bluish colour.
Dark scene is decreased in Dark scene is increased in
reddish colour. reddish colour.
Dark scene is decreased in Dark scene is increased in
greenish colour. greenish colour.
Dark scene is decreased in Dark scene is increased in
bluish colour. bluish colour.
Dynamic: This setting is best for very bright ambient lighting.
Cinema
Natural: This setting is for normal lighting conditions.
Cinema: This setting is best for watching movie.
Adjust for maximum visibility to suit the ambient brightness.
This can adjust further till [+40] by pressing and holding
button at [+31]. The colour for [+32] to [+40] numbers will change
from green to magenta. This special mode is better for dark scenes.
For normal viewing we recommend that the Contrast is set to [+31].
"Panel Life" in the Function Menu should be set to Normal when this
Contrast setting is adjusted.
Adjust to preference.
Adjust to preference.
Shift to the minus (-) side for a softer effect and plus (+) for sharper
picture.
This is not available to adjust when receiving PAL/SECAM signal.
Then the character will be greyed out.
Adjust for most realistic skin colour.
Black / White
Normally set to Cool.
Dynamic:Emphasizes the differences between video shadings to
Dynamic
Normal : The gradation of an image is reproduced as faithfully as
Auto:Detects image brightness and automatically adjusts for natural
brightness.
The original factory settings for the items of this Menu page can be
restored by pressing the OK button.
Performs picture signal noise reduction. Turn up to reduce noise.
High
Performs colour signal noise reduction. Turn up to reduce noise.
And it will be fixed as Off only when selecting DVI-STB mode.
On:Automatically detects the movie film material and faithfully
reproduces the original film image.
On
Off:Set to OFF when switching between images does not appear
natural.
This is available only when receiving a PAL composite signal. Turn
On
On to reduce the discolorations in fine picture detail and provides
purer colour.
Adjusts the sharpness of the picture signal.
High
Adjusts the sharpness of the colour signal.
Adjusts the black level compensation.
This is available only when receiving an NTSC composite/S.Video
signal. This monitors and adjusts the colour to maintain constant
On
colour levels. It also maintains natural flesh tones whilst preserving
fidelity of background colours.
Turn On when you wish to change colour temperature depending on
On
the user's preference.
Adjust colour temperature depending on the user's preference. These
settings are independently stored in each of the 4 Colour Temperature
modes.
Setup hint
improve the feeling of contrast.
possible.
SELECT