Setup Menu - Hitachi 42PD4200 User Manual

OPERATING INSTRUCTIONS (continued)

SETUP MENU

Picture
Audio
Timer
Function
MENU
Setup
Language
Select
OK Set
Selected characters
Selected characters
Auto Adjust*
Moves the horizontal position
Auto Adjust*
to left.
Horizontal Position
Moves the horizontal position
to left.
Horizontal Position
Moves down the vertical
position.
Vertical Position
Moves down the vertical
position.
Vertical Position
Reduces the dot clock
frequency (shrinks the right
side).
Horizontal Clock
Reduces the dot clock
frequency (shrinks the right
side).
Horizontal Clock
Slows the dot clock phase
(shifts slightly to left).
Clock Phase
Slows the dot clock phase
(shifts slightly to left).
Clock Phase
Reset
(off the function)
Input Level Reset
(off the function)
Input Level
Frequency Display
Frequency Display
WVGA Type
WVGA Type
WXGA Mode
Vertical Filter
Vertical Filter
Frequency Mode Frequency Mode
RGB1
RGB1
RGB2
RGB2
* Depending on the type of signal displayed, displays may not be optimized through automatic adjustment. Adjust manually to optimize them.
OK
(Menu) Adjust
Pressing the OK button here,
Automatic regulation is started.
(Menu) Adjust
Moves the horizontal position
Pressing the OK button here,
to right.
Automatic regulation is started.
Moves the horizontal position
to right.
Moves up the vertical position. Adjust the vertical display position.
Moves up the vertical position. Adjust the vertical display position.
Increases the dot clock
frequency (expands the right
side).
Increases the dot clock
frequency (expands the right
side).
Advances the dot clock phase
(shifts slightly to right).
Advances the dot clock phase
(shifts slightly to right).
(waiting to reset)
0.7V 1.0V
(waiting to reset)
0.7V 1.0V
Off On
Off On
Off On
Off On
Off 1280x768 1366x768
Off Off On On
Movie Movie PC PC
DVI-PC DVI-STB
DVI-PC DVI-STB
RGB Component
RGB Component
Setup
Auto Adjust Adjust
Horizontal Position 0
Vertical Position + 31
Horizontal Clock – 20
Clock Phase 10
Reset Reset
Select Return Exit
Setup
Auto Adjust Adjust
Horizontal Position 0
Vertical Position + 31
Horizontal Clock – 20
Clock Phase 10
Reset Reset
Select Return Exit
Setup
Input Level 0.7V
Frequency Display Off
WVGA Type Off
WXGA Mode Off
Vertical Filter On
Frequency Mode Movie
RGB1 DVI-PC
RGB2 RGB
Select Set Return
Horizontal Position, Vertical Position, Horizontal Clock and Clock
Phase are adjusted automatically.
Horizontal Position, Vertical Position, Horizontal Clock and Clock
Adjust the left-side display position.
Phase are adjusted automatically.
(This function is only for RGB2. It's not available (grayed out) for
RGB1.)
Adjust the left-side display position.
(This function is only for RGB2. It's not available (grayed out) for
RGB1.)
(This function is only for RGB2. It's not available (grayed out) for
RGB1.)
(This function is only for RGB2. It's not available (grayed out) for
RGB1.)
Adjust for maximum character clarity.
(This function is only for RGB2. It's not available (grayed out) for
RGB1.)
Adjust for maximum character clarity.
(This function is only for RGB2. It's not available (grayed out) for
RGB1.)
Adjust for clear character visibility.
(This function is only for RGB2. It's not available (grayed out) for
RGB1.)
Adjust for clear character visibility.
(This function is only for RGB2. It's not available (grayed out) for
The original factory settings for the items of this Menu page can be
RGB1.)
restored by pressing the OK button. (This is effective only for RGB2.)
The original factory settings for the items of this Menu page can be
Normally set to 0.7 V. If white is found to spread across the screen, set
restored by pressing the OK button. (This is effective only for RGB2.)
to 1.0 V. (This is effective only for RGB2.)
Normally set to 0.7 V. If white is found to spread across the screen, set
Set this to Off if the frequency information of the Input Signal Screen
to 1.0 V. (This is effective only for RGB2.)
Display is not required.
This is only available for W-VGA signal. Set this to Off if the frequency information of the Input Signal Screen
When it is set to On, the display area modecan be selected Full or Display is not required.
Real.
This is only available for W-VGA signal.
When it is set to On, the display area modecan be selected Full or
This is only available for (PC) WXGA signal.The display area mode is
Real.
selected [1280x768] or [1366x768].
Turn On when concerned about screen flicker. Turn On when concerned about screen flicker.
Set to Movie when viewing moving images on a personal computer.
Set to Movie when viewing moving images on a personal computer.
This should correspond to the signal mode of the signal from the
This should correspond to the signal mode of the signal from the
equipment that is connected to RGB1 DVI terminal.
equipment that is connected to RGB1 DVI terminal .
This should correspond to the signal mode of the signal from the
This should correspond to the signal mode of the signal from the
equipment that is connected to RGB2 D-sub terminal.
equipment that is connected to RGB2 D-sub terminal.
OK
Horizontal Position 0
Next / Prev Adjust Return
OK
Clock Phase 10
Next / Prev Adjust Return
Setup hint
Setup hint
21