Hitachi 42PD4200 User Manual page 33

OPERATING INSTRUCTIONS (continued)
PICTURE MENU (continued)
Selected characters
Picture Mode
Narrows the gap between
Contrast
brightness and darkness.
Black is subdued for
Brightness
increased overall darkness.
Colour
Darkens colours.
Sharpness
Soft
Enhances red and weakens
Hue
green.
Cool
Colour Temperature
Contrast Mode
Reset
(off the function)
YNR
CNR
Film Mode
PAL Comb Filter
LTI
CTI
Black Enhancement
Auto Colour
Colour Temp. Adjustment
Amplitude
Brighter scene is decreased in
Red
reddish colour.
Brighter scene is decreased in
Green
greenish colour.
Brighter scene is decreased in
Blue
bluish colour.
Cut Off
Dark scene is decreased in
Red
reddish colour.
Dark scene is decreased in
Green
greenish colour.
Dark scene is decreased in
Blue
bluish colour.
Dynamic Natural
Broadens the gap between
brightness and darkness.
Black is set off for increased
overall brightness.
Lightens colours.
Sharp
Enhances green and weakens
red.
Normal Warm Black / White
Normal Auto Dynamic
(waiting to reset)
Off Low High
Off On
Off On
Off Low Middle High
Off On
Off On
Brighter scene is increased in
reddish colour.
Brighter scene is increased in
greenish colour.
Brighter scene is increased in
bluish colour.
Dark scene is increased in
reddish colour.
Dark scene is increased in
greenish colour.
Dark scene is increased in
bluish colour.
Setup hint
Dynamic: This setting is best for very bright ambient lighting.
Natural: This setting is for normal lighting conditions.
Adjust for maximum visibility to suit the ambient brightness.
This can adjust further till [+40] by pressing and holding
button at [+31]. The colour for [+32] to [+40] numbers will change
from white to magenta. This special mode is better for dark scenes.
For normal viewing we recommend that the Contrast is set to [+31].
"Panel Life" in the Function Menu should be set to Normal when this
Contrast setting is adjusted.
Adjust to taste.
Adjust to taste.
Normally set to Centre position Shift to the minus (-) side for a softer
effect and plus (+) for sharper picture.
This is not available to adjust when receiving PAL/SECAM signal.
Then the character will be grayed out.
Adjust for most realistic skin colour.
Normally set to Cool.
Dynamic:Emphasizes the differences between video shadings to
improve the feeling of contrast.
Normal : The gradation of an image is reproduced as faithfully as
possible.
Auto:Detects image brightness and automatically adjusts for natural
brightness.
The original factory settings for the items of this Menu page can be
restored by pressing the OK button.
Performs picture signal noise reduction. Turn up to reduce noise.
Performs colour signal noise reduction. Turn up to reduce noise.
And it will be fixed as Off only when selecting DVI-STB mode.
On:Automatically detects the movie film material and faithfully
reproduces the original film image.
Off:Set to OFF when switching between images does not appear
natural.
This is available only when receiving a PAL composite signal. Turn On
to reduce the discolorations in fine picture detail and provides purer
colour.
Adjusts the sharpness of the picture signal.
Adjusts the sharpness of the colour signal.
Adjusts the black level compensation.
This is available only when receiving an NTSC composite/S.Video
signal. This monitors and adjusts the colour to maintain constant
colour levels. It also maintains natural flesh tones while preserving
fidelity of background colours.
Turn On when you wish to change colour temperature depending on
the user's preference.
Adjust colour temperature depending on the user's preference. These
settings are independently stored in each of the 4 Colour Temperature
modes.
cursor
33