Remote Control; Loading Batteries; Handling The Remote Control - Hitachi 42PD4200 User Manual

COMPONENT NAMES (continued)

Remote control

POWER OFF button
POWER ON / OFF button
PICTURE MODE button
POWER ON button
RECALL button
INPUT SELECT button
RGB/VIDEO buttons
PROGRAM UP / DOWN buttons
DVD CONTROL buttons
MENU button
PROGRAM SELECT buttons
PROGRAM UP / DOWN buttons

Loading Batteries

1. Open the battery cover.
• Slide back and remove the battery
cover in the direction of the arrow.
Loading Batteries
1. Open the battery cover.
• Slide back and remove the battery
cover in the direction of the arrow.
2. Load batteries.
• Load two Size AA batteries included
observing the correct polarities.
2. Load batteries.
• Load two Size AA batteries included
observing the correct polarities.
3. Close the battery cover.
• Replace the battery cover in the
3. Close the battery cover.
direction of the arrow and snap it back
• Replace the battery cover in the
into place.
direction of the arrow and snap it back
into place.
CAUTION
• Do not use new and old batteries together. The batteries could
explode or leak, resulting in fires, physical injury, or stains.
CAUTION
• When loading batteries, observe their correct polarities as marked
on the product. If loaded in the wrong direction, the batteries
• Do not use new and old batteries together. The batteries could
could explode or leak, resulting in fires, physical injury, or stains.
explode or leak, resulting in fires, physical injury, or stains.
• When loading batteries, observe their correct polarities as
marked on the product. If loaded in the wrong direction, the
batteries could explode or leak, resulting in fires, physical injury,
or stains.
Remote
13
13
MUTE button
14
MENU button
14
PinP button
34
AUTO button
16
OK button
16
OK button
16
ID button
16
TIME button
D / N
i +
I / II
VOL
A / B 2-4-12
MENU
P+
RGB 1 RGB 2 MUTE VOL
- +
OK
AV1 AV2 AV3 AV4
P-
D V D
AUTO PinP SIZE RECALL
FREEZE
MENU
ZOOM
OK
1 2 3
ID ID SET
4 5 6
7 8 9
0
AV1 AV2 AV3 AV4
RGB1 RGB2

Handling the Remote Control

Use the remote control within about 5 m from front of the unit's
remote-control sensor and within 30 degrees on both sides.
Handling the Remote Control
Use the remote control within about 5 m from front of the unit's
remote-control sensor and within 30 degrees on both sides.
With in 30
degrees
About 3m
With in 30
degrees
About 3m
ATTENTION
• Do not drop or impact the remote control.
• Do not splash the remote control with water or put it on a wet
object to avoid possible failures.
• Before leaving the remote control out of use for an extended
period of time, remove the batteries from it.
ATTENTION
• If the remote control begins to lack responsiveness, replace the
• Do not drop or impact the remote control.
batteries.
• Do not splash the remote control with water or put it on a wet
• Strong light such as direct sunlight impinging on the
object to avoid possible failures.
photoreceptor of the remote control can cause operational
• Before leaving the remote control out of use for an extended
failure. Position this unit to avoid direct contact with such light.
period of time, remove the batteries from it.
• If the remote control begins to lack responsiveness, replace the
batteries.
• Strong light such as direct sunlight impinging on the
photoreceptor of the remote control can cause operational
failure. Position this unit to avoid direct contact with such light.
AUDIO MODE button
13
POWER ON/OFF button
SURROUND button
CH I / II button
MULTI PICTURE (PinP) button
14
VOLUME UP/DOWN buttons
Buttons for MULTI PICTURE mode
RETURN button
SELECT / ADJUST buttons (
15
SIZE button
VOLUME UP / DOWN buttons
15
RECALL button
MUTE button
FREEZE button
ZOOM button
16
RETURN button
16
SELECT/ADJUST buttons
16
ID SET button
RGB / VIDEO buttons
With in 30
degrees
With in 30
About 3m
degrees
About 3m
About 5m
About 5m
VOL
D / N RGB 1 RGB 2 MUTE VOL
i + I / II AV1 AV2 AV3 AV4
AUTO PinP SIZE RECALL
A / B 2-4-12
MENU
P+ MENU
- +
OK
OK
P-
D V D
ID ID SET
FREEZE
ZOOM
1 2 3
4 5 6
7 8 9
0
AV1 AV2 AV3 AV4
RGB1 RGB2
)
9