Service Menu Settings; Service Menu Items; Picture Adjust; Sound1 - Hitachi 42PD3200A Service Manual

13. SERVICE MENU SETTINGS

To enter the service menu, first enter the MENU by pressing "
2 and 5 respectively.
13.1.

Service Menu Items

13.1.1. Picture Adjust

Source
Mode
Colour Temp
Contrast
Brightness
Sharpness
Colour
R
G
B
In this menu preset values for each Mode (Contrast, Brightness, Sharpness, Colour values for each
Mode-NATURAL, DYNAMIC, CINEMA) and for each Colour Temp. (R, G, B values for each Colour
Temp- COOL, NORMAL, WARM) are determined for each source.

13.1.2. SOUND1

Menu Subwoofer
is visible in sound menu, else Subwoofer is not available.
Subwoofer Level (dB)
Subwoofer Corner Freq. (x10Hz) => Last low frequency value that is amplified. 5...40
Menu Dolby Prologic
Menu Equalizer
Menu Lineout
Menu Headphone
Menu Hyper Sound
Menu Wide Sound
Menu Dynamic Bass
Menu Virtual Dolby
Carrier Mute
else not.
Virtual Dolby Text
selection; seen in sound menu as 3D PANORAMA or VIRTUAL DOLBY.

13.1.3. SOUND 2

AVL
Menu AVL
controlled from sound menu by normal user, else AVL is invisible to normal user.
FM PRESCALE AVL ON
prescale value for the related standard. 0...127
NICAM PRESCALE AVL ON
prescale value for the related standard. 0...127
SCART PRESCALE AVL ON
prescale value for scart outputs. 0...127
SCART VOLUME AVL ON
value for scart1 and scart2. 0...127
FM PRESCALE AVL OFF
prescale value for the related standard. 0...127
NICAM PRESCALE AVL OFF
prescale value for the related standard. 0...127
SCART PRESCALE AVL OFF => If AVL OFF, set value in this item is used as
prescale value for scart outputs. 0...127
=> All possible sources given with the chasis as a list.
=> Three items as a list; NATURAL, DYNAMIC, CINEMA
=> Three items as a list; COOL, NORMAL, WARM
=> Slider Bar. Changing value between 0 to 63.
=> Slider Bar. Changing value between 0 to 63.
=> Slider Bar. Changing value between 0 to 16.
=> Slider Bar. Changing value between 0 to 99.
=> Slider Bar. Changing value between 0 to 100.
=> Slider Bar. Changing value between 0 to 100.
=> Slider Bar. Changing value between 0 to 100.
=> If ON, Subwoofer option is available in TV set, and the item
=> This value is gain value of Subwoofer output in dB. -30...12
=> No functionality now.
=> If ON, visible in sound menu, else invisible.
=> No functionality now.
=> If ON, visible in sound menu, else invisible.
=> If ON, visible in sound menu, else invisible.
=> If ON, visible in sound menu, else invisible.
=> If ON, visible in sound menu, else invisible.
=> If ON, visible in sound menu, else invisible.
=> If ON, in the absence of an FM carrier the output is muted,
=> Active if VIRTUAL DOLBY is ON. According to the
=> AVL is controlled from this menu by service user. ON/OFF
=> If ON, AVL item is visible in sound menu, and AVL can be
=> If AVL ON, set value in this item is used as
=> If AVL ON, set value in this item is used as
=> If AVL ON, set value in this item is used as
=> If AVL ON, set value in this item is used as volume
=> If AVL OFF, set value in this item is used as
=> If AVL OFF, set value in this item is used as
37
" button and then press the digits 4, 7,