Table of Contents
Advertisement
!
Warning
•
Danger - Explosion hazard. Do not use in the presence of flammable anesthetics, and other
flammable materials.
•
To prevent fire or shock hazards, do not immerse the unit in water or expose it to rain or
moisture.
•
Do not use the unit with an extension cord receptacle or other outlets unless the prongs of the
power cord can be fully inserted.
•
RISK OF ELECTRICAL SHOCK - DO NOT OPEN. To reduce the risk of electrical shock,
DO NOT remove the back of the equipment or open the enclosure. No user-serviceable parts
are inside. Refer servicing to qualified field service engineers only.
•
Uninsulated voltage within the unit may have sufficient magnitude to cause electrical shock.
Avoid contact with any part inside the unit.
Caution
•
Power cord is used as a disconnection device. To de-energize equipment, disconnect the
power cord.
•
This unit must follow the national requirement, and local state laws to dispose unit.
•
Before connecting the cables to your Elo touchmonitor, make sure all components are
powered OFF.
•
The use of ACCESSORY equipment not complying with the equivalent safety requirements
of this equipment may lead to a reduced safety of the resulting system. Consideration
relating to the choices of accessory equipment should include:
•
Use of accessory in the patient vicinity.
•
Evidence that the safety certification of the accessory has been performed in accordance
to the appropriate IEC 60601-1 and/or IEC 60601-1-1 harmonized national standard.
•
For continued safety
- This unit only complies to the above standards if used with a medical grade power cord.
-A medical grade power supply, such as the one specified, is required for use in a medical
application.
!
Note:
•
This symbol alerts the user to important information concerning the operation and
maintenance of this unit, which should be read carefully to avoid problems.
•
This symbol means DC Current.
•
This symbol means ON/OFF stand-by switch.
Warnings and Cautions
iv
Advertisement
Table of Contents
