Audio Outputs; Communications Connections; Other Connections - Meridian 568 User Manual

Audio outputs

The following table gives details of the analogue and digital
outputs:
Use this output
MAIN 1-2
CENTRE/SUB 3-4
SIDES/SUB 5-6
REARS 7-8
To use a Meridian DSP loudspeaker in a particular position
connect it to the appropriate digital output.
To use a Meridian active loudspeaker, or an analogue speaker in
conjunction with a suitable power amplifier, connect the input of
the power amplifier to the appropriate analogue output.
54
To connect to this
Main left and right speakers.
Centre speaker and centre or mono
subwoofer.
Left and right subwoofers, or side left
and side right surround speakers.
Left and right rear surround speakers.

Communications connections

The following table gives details of the communications
connections:
Use this connection To connect to this
COMMS Other Meridian 500 Series
equipment, and the master digital
speaker.
RS232 The serial port of a PC, to
configure the 568. See Configuring
the digital surround processor
using a computer, page 77.

Other connections

The following table gives details of the other connections:
Use this connection To connect to this
BYPASS A digital tape recorder, or second
digital surround processor.
EXPANSION Depends on the expansion card
fitted; consult your Meridian dealer.