Changing The Display - Meridian 568 User Manual

Changing the display

The digital surround processor displays information about the
current settings on the 12-character front panel display. In
addition, it can display the same information superimposed on a
video image. For more information about setting up the
on-screen display refer to Connecting video, page 55.
To change the display
Press Display.
Each time you press Display the display will step between the
options shown in the table opposite.
In addition, the following symbols on the front panel display
indicate which of the DSP processing modes are operating:
Symbol What it means
THX processing is operating.
Dolby processing is operating.
Input is DTS.
MPEG Input is MPEG.
Display option
DSP preset and volume
DSP preset and THX gain
Source and volume
Audio stream
Blank
The audio stream display option shows the following three
pieces of information about the audio stream:
A C 3 5 . 1
Format: Input channels:
PCM 2-channel PCM Main.LFE
AC3 Dolby Digital
DTS DTS encoding
MPG MPEG encoding
MLP MLP encoding
Example
M u s i c 6 5
M u s i c - 2 2
R a d i o 6 5
AC3 5.1 44k
4 4 k
Sample rate:
96k 96kHz
88k 88kHz
48k 48kHz
44k 44kHz
NL Not locked 21