Table of Contents
Advertisement
Audio outputs
The following table gives details of the analogue and digital
outputs:
Use this output
MAIN 1-2
CENTRE/SUB 3-4
SIDES/SUB 5-6
REARS 7-8
To use a Meridian DSP loudspeaker in a particular position
connect it to the appropriate digital output.
To use a Meridian active loudspeaker, or an analogue speaker in
conjunction with a suitable power amplifier, connect the input of
the power amplifier to the appropriate analogue output.
58
To connect to this
Main left and right speakers.
Centre speaker and centre or mono
subwoofer.
Left and right subwoofers, or side left and
side right surround speakers.
Left and right rear surround speakers.
Communications connections
The following table gives details of the communications
connections:
Use this connection
To connect to this
COMMS
Other Meridian 500 Series
equipment, and the master digital
speaker.
RS232
The serial port of a PC, to configure
the 568.2. See Configuring the
digital surround processor using a
computer, page 81.
Other connections
The following table gives details of the other connections:
Use this connection
To connect to this
BYPASS
A digital tape recorder, or second
digital surround processor.
EXPANSION
Depends on the expansion card
fitted; consult your Meridian dealer.
Advertisement
Table of Contents
