Table of Contents
Advertisement
Installing the Meridian Configuration program
Requirements
To use the Meridian Configuration program you need:
A computer running Windows 95 or Windows NT 4.00.
A 100MHz or faster Pentium-class processor.
At least 16 Mbytes of RAM.
5 Mbytes of free disk space.
A vacant 9-pin serial port assigned to one of COM1 to 4.
The software requires a mouse or similar pointing device – it
cannot be operated solely from the keyboard.
To install the Meridian Configuration
program
Insert the first Meridian Configuration program installation
disk.
Choose Run... from the Start menu.
Type A: setup and press R.
Follow the on-screen instructions, inserting the second
installation disk when prompted.
Planning the configuration
Before creating a configuration for your 568 Digital Surround
Processor it is a good idea to plan the following aspects of your
setup:
How you are going to set up the different speakers in your
layout.
Whether the bass is going to be handled by the main
speakers, or by one or more subwoofers.
Which analogue or digital inputs you are going to use for each
of your sources.
Which DSP preset you want as the default preset for each
source and audio format.
79
Advertisement
Table of Contents
