Mark Levinson 500H series Owner's Manual page 29

Nº500H Series Power Amplifier
Input & Output Connectors
Control Connectors
Rated Output Power
Frequency Response
Signal-to-Noise Ratio
Input Impedance
Voltage Gain
Input Sensitivity
Power Requirements
Dimensions*
Weight
Operating Environment
Nº535H Specifications
All specifications are subject to change without notice.
• five balanced XLR inputs per channel
• five unbalanced RCA inputs per channel
• fi ve pairs loudspeaker outputs with banana-plug sockets
per channel (banana-plug socket not available on the
230 VAC models)
• one Ethernet 10Base-T port
• one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc
• one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc
• 3-pin IEC standard power connector
20Hz to 20kHz at <0.5% THD, 200W per channel @ 8 Ω, full
output from 1.84Vrms
within 0.5dB from 10Hz to 20kHz
>85dB, reference level: 2.83 Vrms
60 kΩ (balanced); 30 kΩ (unbalanced)
26.8dB
2.83Vrms output at 130mVrms input
100V~, 120V~, 230V~, 1000W, factory set for destination country
• Height (with feet): 7.65" (19.4cm)
• Height (without feet): 6.97" (17.7cm)
• Width: 17.75" (45.1cm)
• Depth: 19.83" (50.4cm)
*See dimensions diagram on the next page.
• Net weight: 98.5 lbs (44.7kg)
• Shipping weight: 108.5 lbs (49.2kg)
• Operating temperature: 0º to 35ºC (32º to 95ºF)
• Storage temperature: –30º to 75ºC (–22º to 167ºF)
• Relative humidity: 95% maximum without condensation
25