Service Mode - Marantz CD6000 series Service Manual

4. SERVICE MODE

1. How to enter into the Service Mode
Turn the power on while pressing [PLAY]+[OPEN/
CLOSE] buttons together.
The display shows "model number", "microprocessor ver-
sion" and "mode".
C D 6 0 : 1 0 P 0 0
Microprocessor version
Model number
2. Mode 0 (display "P 00")
Condition: [FOCUS OFF], [SPINDLE OFF], [RADIAL
OFF], [MUTE ON]
• While pressing [NEXT
side.
And, release from this button. The sledge return to
neutral position.
• Press [NEXT ] button, the function will change to
"Mode 1".
3. Mode 1 (display "P 01")
Condition: [FOCUS ON], [SPINDLE OFF], [RADIAL OFF],
[MUTE ON]
• Press [NEXT ] button, the function will change to
"Mode 2".
• Press [PREV ] button, the function will change to
"Mode 0".
4. Mode 2 (display "P 02")
Condition: [FOCUS ON], [SPINDLE ON], [RADIAL OFF],
[MUTE ON]
• Press [NEXT ] button, the function will change to
"Mode 3".
• Press [PREV ] button, the function will change to
"Mode 1".
5. Mode 3 (display "P 03")
Condition: [FOCUS ON], [SPINDLE ON], [RADIAL ON],
[MUTE OFF]
• Press [PREV ] button, the function will change to
"Mode 2".
The following button operations are available at the
Service Mode.
1) While pressing [STOP] button, FL display shows all
segments.
2) Press [PAUSE] button. FL display shows each
segments one by one automatically. (Segments test
mode) And, press [PAUSE] button again, this mode will
be stopped.
3) The same as Normal operation is performed by
pressing [PLAY] button. (Except segments test mode.)
However if some default is detected, display shows an
error code. (For example: "Err 10") Refer to the "Table
1 ERROR CODE".
6. Canceling the Service Mode
The Service Mode is canceled by turning the power off.
Mode number
] button,the sledge moves out
Table 1 ERROR CODE
Error Code
Err 02
Err 07
Err 08
Err 09
Err 10
Err 11, 12
Err 13
Err 16 ~ 20
Err 30
Err 31
Err 32 ~ 47
4
Error
FOCUS Error
SUB CODE Error
T. O. C. Error
DECODER Error
RADIAL Error
SLEDGE Error
SPINDLE Error
SEARCH Error
DOOR Error
TRAY Error
BUTTON INPUT Error