Table of Contents
Advertisement
3. SERVICE MODE
1.
Turning into Service Mode
While pressing DISPLAY and QUICK REPLAY buttons, press
POWER button.
2.
Mode0 (Display : Ver :
micro computer is displayed)
Status: [FOCUS OFF] [SPINDLE OFF] [RADIAL OFF] [MUTE ON]
• While pressing
and
moves toward the outer edge. Release the button makes
the sledge return to the origin.
Press EASY JOG or NEXT
to Mode 1.
3.
Mode 1 (Display : Ver :
Status: [FOCUS ON] [SPINDLE OFF] [RADIAL OFF] [MUTE ON]
• Press NEXT
button to go to Mode 2.
• Press PREV
button to go to Mode 0.
4.
Mode 2 (Display : Ver :
Status: [FOCUS ON] [SPINDLE ON] [RADIAL OFF] [MUTE ON]
• Press NEXT
button to go to Mode 3.
• Press PREV
button to go to Mode 1.
5.
Mode 3 (Display : Ver :
Status: [FOCUS ON] [SPINDLE ON] [RADIAL ON] [MUTE OFF]
• Press PREV
button to go to Mode 1.
In this Service Mode, all of the following button functions
work in any status.
DISPLAY
1) Press
button to light up all the FL segments.
Press it again then each FL segment lights up one by
one.
STOP
2) Press
button. Then press a button on the unit.
The name of the button is displayed.
Pressing a button on the remote displays the RC-5
code of the button.
PLAY
3) Press
button in Mode 1, 2 or 3 then normal
operation can be performed. If an error occurs the
error number is displayed. (Ex : Err 10) See the table
below.
6.
Terminating Service Mode
Turn off power to quit Service Mode.
All manuals and user guides at all-guides.com
P00 Version number of the
buttons, the sledge
button on the remote to go
P01 )
P02 )
P03 )
DISPLAY QUICK REPLAY
EASY JOG
NEXT
PREV
NEXT
PREV
PREV
DISPLAY
STOP
Error Code
Err 02
FOCUS Error
Err 07
SUB CODE Error
Err 08
T. O. C. Error
Err 09
DECODER Error
Err 10
RADIAL Error
Err 11, 12
SLEDGE Error
Err 13
SPINDLE Error
Err 16 ~ 20
SEARCH Error
Err 30
DOOR Error
Err 31
TRAY Error
Err 32 ~ 47
BUTTON INPUT Error
6
POWER
P 0 0
NEXT
P 0 1
P 0 2
P 0 3
PLAY
Error
Advertisement
Table of Contents
