Table of Contents
Advertisement
6. SERVICE MODE
How to upgrade by upgrade DISC. (*VC5400xxx)
First, connect a TV or monitor to the DVD Player and Operate by using Remote Controller.
1) Press the POWER button to turn on the unit.
2) Press the OPEN/CLOSE button to open the tray, Insert the update CD-ROM (part No.:*VC5400xxx).
3) Press the OPEN/CLOSE button to close the tray.
4) After about 30 seconds, The disc tray opens automatically.
TV or monitor indicates
5) Remove the CD-ROM from the disc tray.
6) Press ARROW (up) button of the Remote Controller.
7) The disc tray close, Firmware update will be done automatically.
Updating takes about 1 minute.
When updating is fi nished, TV or monitor screen shows the initial pictures as shown below.
Upgrade is completed
Firmware Upgrade Mode
Upgrading:0
Take off the disc and press UP key to upgrade
ARROW(up)
8
Advertisement
Table of Contents
