Lucent Technologies Guestworks Server server Issue 3.0 Feature Reference page 48

Controlled Restrictions
The Controlled Toll Restriction feature is a new option with GuestWorks and can
be substituted for either Outward Restriction or Station-to-Station Restriction.
This substitution was done because most PMS products in use today recognize
only four different types of restrictions. Through administration, you can enable
Outward/Toll Restriction, Station-to-Station/Toll Restriction, Termination
Restriction, and Total Restriction.
The ways to activate controlled restrictions are as follows:
When you check in a guest, all controlled restrictions are removed from
the room telephone. When the guest checks out, Outward Restriction or
Toll Restriction is enabled for the room telephone.
When you or a guest sets up a Do Not Disturb request, Termination
Restriction is enabled for the room telephone.
Using a feature access code from the attendant console or from a voice
terminal with console permissions, you can enable any of the controlled
restrictions for a guest room telephone.
Using a feature access code from the attendant console or from a voice
terminal with console permissions, you can enable any of the controlled
restrictions for the telephones in a group of guest rooms. This grouping is
based on the administered Class of Restriction (COR).
Using the PMS, you can enable any of the individual controlled restric-
tions plus some predefined combinations. These combinations include
the following:
— Outward/toll and station-to-station/toll
— Outward/toll and termination
— Station-to-station/toll and termination
NOTE:
42 Issue 1 April 1997
Since current PMS products do not automatically recognize the
new Toll Restriction feature, PMS terminal users must be trained
that Toll Restriction may be substituted for either Outward or Sta-
tion-to-Station Restriction.