Lucent Technologies Guestworks Server server Issue 3.0 Feature Reference page 10

Conventions
Buttons you press on the console or backup voice terminal are shown as
follows:
Release
The buttons shown in this document use label designations provided by
Lucent Technologies. Since the button labels can be customized for each
site, some button labeling may have different designations.
Some button labels, such as
spacing in this document, they are shown across one line of text, such as
Serial Call
Administration command paths and options you enter in the administra-
tion fields are shown as follows:
change system-parameters hospitality
Field names shown on the administration screens are shown as follows:
Extension of PMS
The term "dial keypad" refers to the touch-tone keypad where you dial
(enter) telephone numbers and feature access codes.
When a procedure refers to a "room number," the procedure is referring
to the extension number of the room. Extension numbers and room num-
bers do not always match.
Times entered for features, such as Automatic Wakeup and Do Not Dis-
turb, must consist of the hour followed by minutes in a multiple of 5 min-
utes; minute entries that do not meet this requirement will be rounded off
by the server to the nearest multiple of 5. For example, to enter
7:00 a.m., dial
enter 10:15 p.m., dial
Times entered in the range from 13:00 to 00:59 represent 1:00 p.m. to
12:59 a.m. Times entered in the range from 01:00 and 12:59 could
represent either a.m. or p.m., so the server prompts you to designate the
correct time.
In all of the procedures where you enter the time of day, 12:00 a.m. is
midnight and 12:00 p.m. is noon.
4 Issue 1 April 1997
.
. To enter 11:30 a.m., dial
0 7 0 0
2 2
Serial
, span two lines. Because of line
Call
.
1 5
. To
1 1 3 0