Setup [1]; Date - Time - Lorex SG17F6584 Instruction Manual

SETUP [1]

SETUP [1]
This submenu allows you to change the DATE-TIME, ALARM and MISC settings.
DATE-TIME
DATE 2006-01-01
TIME 01:23:45 AM
DATE TYPE: M-D-Y
HOUR TYPE: 12
TIME DISP: ON
ALARM ENABLE
FROM 12:00PM
TO 12:00PM
USE JOG, ENTER, MENU BUTTONS

DATE - TIME

Controls the date and time display settings on the Observation System. Use the SHUTTLE
(JOG) to navigate to the DATE-TIME option, and press ENTER (press down on the SHUTTLE)
to adjust the options.
Continue pressing the ENTER (SHUTTLE) button to switch between options within the
DATE-TIME menu , and turn the SHUTTLE (JOG) to adjust the setting.
1. DATE - Setup for the System Date. Use the Shuttle JOG to change increase/decrease the Year,
Month and Day settings.
2. TIME - Setup for the System Time. Use the Shuttle JOG to change increase/decrease the Hour,
Minute, Second and AM/PM settings.
3. DATE TYPE - Setup for the System Date Format. Use the Shuttle JOG to change the setting
to M-D-Y, D-M-Y or Y-M-D.
4. HOUR TYPE - Setup for the System Hour Format. Use the Shuttle JOG to change the setting
to either a 12 Hour Clock or a 24 Hour Clock.
5. TIME DISP - Turns the Time Display ON or OFF on the Observation System. Use the Shuttle
JOG to change the setting to ON or OFF.
To exit the DATE-TIME menu, press the MENU key on the front panel of the Observation
System.
20
SETUP [ 1 ] V1.0N/RC2
MISC
PIP LOC: "
SEQUENCE: FULL
NAME DISP: ON
AUDIO: ON
ALM BEEP: ON
ALARM OUT: H
ALARM RST: 60S
NEXT ...... EXIT