Setting Pos (Position Selector) - Eclipse AVN6620 Owner's Manual

Setting POS (position selector)

The stereophonic position for obtaining optimum acoustic effects can be adjusted to match
the number and position of passengers.
In addition, front-to-back, right-to-left volume balance can be adjusted for the selected
position.

Touching the image of a seat
shown on the POS setting screen
will change the position.
• The selected position will change its
color to orange. Touching the seat
again will cancel the selection. The
four positions shown by the table
below can be set.
OFF
• Touching
settings.
BACK
• Touch
will return to the previous operation screen.
Touch switch
• This setting cannot be done at the same time as adjustment of the volume
balance (see next page) and the Circle Surround II (page 43).
• The default settings of the main unit are configured for left-hand drive vehicles.
will cancel all
after changing settings. The position will be saved and the system
Function
Acoustics optimized for
driver's seat
Acoustics optimized for
passenger's seat
Touch switch
Acoustics optimized for
Acoustics optimized for
Function
both front seats
rear seats
35