Setting X-Over - Eclipse AVN6620 Owner's Manual

The frequencies for the front and rear speaker high-pass filter (HPF) and sub-woofer low-
pass filter (LPF) can be set within a range of 63 / 80 / 100 / 125 / 160 / 200 Hz. (This is the
same as setting the HPF and LPF cutoff frequencies.)

Touch or
off frequency.

Touch
6dB/oct
to select the slope.
PASS
BACK
• Touch
settings.
The crossover setting will be saved
and the system will return to the previous screen.
If no sub-woofer has been connected, set the slope adjustment to "PASS". (If
slope is set to a setting other than PASS, the low frequency range will not be
output from the speakers.)

Setting X-OVER

to select the cut
, or
12dB/oct
after changing
41