Installing The Driver Software; Installing The Touch Driver For Windows 2000, Me, 95/98 And Nt 4.0; And Nt - Elo TouchSystems Entuitive 1725L Series User Manual

Installing the Driver Software

Elo TouchSystems provides driver software that allows your touchmonitor to
work with your computer. Drivers are located on the enclosed CD-ROM for the
following operating systems:
• Windows 2000
• Windows Me
• Windows 98
• Windows 95
• Windows NT 4.0
Additional drivers and driver information for other operating systems (including
MS DOS, Windows 3.x, OS/2, Macintosh and Linux) are available on the Elo
TouchSystems web site at www.elotouch.com.
Your Elo touchmonitor is plug-and-play compliant. Information on the video
capabilities of your touchmonitor is sent to your video display adapter when
Windows starts. If Windows detects your touchmonitor, follow the instructions
on the screen to install a generic plug-and-play monitor.
Refer to the appropriate following section for driver installation instructions.
Installing the Touch Driver for Windows 2000, Me, 95/98

and NT 4.0

N : For Windows 2000 and NT 4.0 you must have administrator access rights to install the
OTE
driver.
1
2
If the AutoStart feature is not active:
1
2
3
4
2-10
E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e
Insert the Elo CD-ROM in your computer's CD-ROM drive.
If the AutoStart feature for your CD-ROM drive is active, the system
automatically detects the CD and starts the setup program.
Follow the directions on the screen to complete the driver setup for your
version of Windows.
Click Start > Run.
Click the Browse button to locate the EloCd.exe program on the CD-ROM.
Click Open, then OK to run EloCd.exe.
Follow the directions on the screen to complete the driver setup for your
version of Windows.