Elo TouchSystems Entuitive 1225L Series User Manual page 22

2. Follow the directions on the screen to complete the driver setup
for your version of Windows.
If the AutoStart feature is not active:
1. Click Start > Run.
2. Click the Browse button to locate the touch.exe pro-
gram on the CD-ROM.
3. Click Open, then OK to run touch.exe.
4. Follow the directions on the screen to complete the driver
setup for your version of Windows.
Installing the Touch Driver for MS-DOS and
Windows 3.1
You must have a DOS mouse driver (MOUSE.COM) installed
for your mouse if you wish to continue using your mouse along
with your touchmonitor in DOS.
To install Windows 3. x and MS-DOS from Windows 95/98, fol-
low the directions below:
1. Insert the Elo CD-ROM in your computer's CD-ROM drive.
2. From DOS, type d:\EloDW to change to the correct di-
rectory on the CD-ROM (your CD-ROM drive may be
mapped to a different drive letter).
3. Type install and press Enter to start the installation.
4. Align the touchscreen.
Refer to Chapter 2 of the Elo DOS and Windows Driver Guide
as necessary for additional installation information. The driver
guide can be found on Elo's web site at www.elotouch.com.