EPSON Stylus Scan 2500
The scanner mechanism requires no adjustment for any service operation
provided you closely follow the specifications in this manual and the
instructions in Chapter 4 "Disassembly and Assembly".
Adjustment
5.1 Required Adjustments
The Stylus Scan printer mechanism requires the adjustments shown in Table
5-1. Perform the necessary adjustment referring to the steps and figures
described throughout this chapter. Table 5-2 provides a list of necessary
adjustments and the conditions when they are required.
Table 5-1. List of Service Procedures That Require Adjustment
No.
Content of Operation
1
Replacement of the printhead
2
Replacement of the main board
Replacement or Removal of the
3
Carriage Unit
4
Replace of the CR Motor
Replacement of the Printer
5
Mechanism
Replacement of the waste ink
6
pads
Required Adjustments
Revision A
Adjustment Procedure
1. Perform Vh voltage writing
operation.
2. Perform initial ink charge.
3. Perform printhead angle adjustment.
4. Perform Bi-d Adjustment.
1. Perform Vh voltage writing
operation.
2. Perform Bi-d adjustment.
1. Perform parallel adjustment.
2. Perform printhead angle adjustment.
3. Perform Bi-d adjustment.
4. Reset ink counter.
1. Perform Bi-d adjustment.
1. Perform Head Voltage ID Input.
2. Perform initial ink charge.
3. Perform Bi-d adjustment.
1. Reset waste ink counter
108