Epson Stylus Pro XL Service Manual page 47

Adjustment
Note: When checking the gap between the carriage roller and the front frame, use the thickness
gauge or the paper guide plate. If the gap is correct the gauge cannot be installed into the
gap. If the gap is incorrect, the gauge can be inserted in the gap.
0.04 mm
Thickness
Gauge
6. Move the carriage manually to the right adjustment position and repeat steps 3, 4 and 5 referring to
Figures 4-17 and 4-18.
4-20
Carriage Roller
G AP
Eject Frame
Figure 4-18. Confirming the Gap
Stylus Pro XL+ Service Manual
Rev.A