Epson Stylus Pro XL Service Manual page 43

Adjustment
The adjustment value input menu appears as shown:
INPUT ADJUST No. (IF OK INPUT Y)?
adjust
5. If the sample print is not vertically aligned for both odd-numbered lines (black lines) and
even-numbered lines (magenta lines), enter a compensation value in the range from 32 to +32.
Positive compensation value: Shifts the 2nd line to the left
Negative compensation value: Shifts the 2nd line to the right
When both the black and magenta lines are vertically aligned, input Y or y, and press ENTER. This
returns you to the main menu.
6. When the main menu appears, choose "10, Change customer & data / END" by typing 10 and Enter.
(This returns you the destination setting menu.)
7. Choose "7, END" by typing 7 and pressing ENTER to quit the adjustment program.
Settings have not yet been written to the EEPROM. Turn off the printer immediately after the
adjustments.
8. Turn off the printer.
4-16
range (from –32 to 32)
Stylus Pro XL+ Service Manual
Rev.A