Upper Housing Removal - Epson Stylus PHOTO 820 Service Manual

EPSON Stylus PHOTO 810/820

4.2.1 Upper housing removal

1. Move the Edge guide on the ASF unit to the rightmost position.
Edge guide
Figure 4-2. Edge guide setting position for the Lower housing removal
Make sure that the Edge guide is in the cutout portion of the
Upper housing.
Disassembly and Assembly
2. Release total seven hooks of the Upper housing by using the precision screwdriver
(-).
left side
Figure 4-3. Hooks position of the Upper housing
Do not damage hooks by the precision screwdriver (-) in
removing the Upper housing.
Do not tilt the printer too much when the Upper housing is
removed by the precision screwdriver (-). This is because ink
may flow if the cap is not covered by the Printhead. (CR is out of
the home position)
Disassembly
Revision A
Backside
right side
Hooks
Front
85