Epson Stylus PHOTO 820 Service Manual page 86

EPSON Stylus PHOTO 810/820
3. Move the protrusion of the Upper housing, which contacts USB interface, to the
right side slightly by using the precision screwdriver (-).
USB interface
Figure 4-4. Protrusion position of the Upper housing
Do not damage the protrusion by the precision screwdriver (-).
When assembling the Upper housing to the printer,
Make sure that the lower metal fittings for locking the
Parallel interface is on the Housing.
Make sure that seven hooks of the Upper housing is correctly
fixed to the Lower housing.
Make sure that there is not the clearance between the Upper
housing and the Lower housing.
Disassembly and Assembly Disassembly
Revision A
86