Specifications; Safety Warnings And Precautions - Pacific hydrostar 94649 Assembly And Operating Instructions Manual

Motor
Pump Cord
Discharge Size
Discharge Fittings
Delivery Height
Flow Rate
Horsepower
Max. Particle Size
Warning: The pump should not be submerged in water deeper than the length of the
power cord, which is 18 feet long.
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
Avoid pump damage. Do not operate dry. Never lift or transport the pump by the
1.
power cable or float switch cable.
2. Do not pump certain liquids. Do not pump gasoline, hydrocarbons, fuel oil,
kerosene, fats, salt or waste water, or chemical agents. Do not pump hot liquids.
Avoid fire or explosion. Do not pump in close proximity to flammable or explosive
3.
materials.
Avoid working alone. If an accident happens, an assistant can bring help.
4.
Avoid electrical shock. If the submersible pump is to be installed in a location
5.
where a breakdown or fault could cause injury to persons, or damage to objects, the
power source must utilize a Ground Fault Circuit Interrupter (GFCI). This device will
immediately shut down power in case of a short circuit. This device must be tested
periodically. No persons should be in contact with the water being pumped.
6. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
Store idle equipment. When not in use, tools must be stored in a dry location to
7.
inhibit rust. Always lock up tools and keep out of reach of children.
SKU 94649

Specifications

120 V, 60 Hz, 7 Amp
18 Ft. - 3 Prong Plug
1-1/2"
1-1/2", 1-1/4" and 1"
26.6 Ft.
3300 GPH
3/4 HP
1"
Save This Manual

Safety Warnings and Precautions

Page 2
Min. Water Level
Operating Temp.
Min. Switch Level
Dimensions
Housing Material
Pump Weight
Motor Drive
4"
95° F
3"
6" Dia. x 13-1/2" H
PP Plastic
10.4 lb.
Magnetic Drive
REV 07/06