Motor 120 V, 60 Hz, 4.7 A (run) Pump Cord 18 Ft. - 3 Prong Plug Discharge Size 1-1/2” Discharge Fittings 1-1/4”, 1-1/2” and 1” Delivery Height 28.3 Ft. Flow Rate 3570 GPH Horsepower Warning: The pump should not be submerged in water deeper than the length of the power cord, which is 18 feet long.
Page 3
Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically nonconductive clothes and nonskid footwear are recommended when working. Wear restrictive hair covering to contain long hair. Use eye and ear protection. Always wear ANSI-approved impact safety goggles. Wear an ANSI-approved dust mask or respirator when working around metal, wood, and chemical dusts and mists.
When unpacking, check to make sure the parts listed on page 8 are included. If any parts are missing or broken, please call Harbor Freight Tools at: 1-800-444-3353. Reminder: This pump should be plugged into an outlet fitted with a Ground Fault Circuit Interrupter (GFCI).
Page 5
Hose Connection: The Universal Fitting (42), in Figure B, connects to various hose sizes. The hoses should be connected using a step nipple (not included). The 1” and 1-1/4” hoses should also be secured with hose clamps (not included). The largest connection (1-1/2”) will yield the greatest flow.
Warning: Do not run the pump dry. It will increase wear to the unit and possibly cause seal damage. Note: This pump has a built-in thermal protector for the motor, which automatically shuts it off to avoid overheating. After it cools, it will cycle back on. Wait for the cycle to continue. Do not try to turn on the pump manually after it has cut off.
Troubleshooting Problem 1: Pump runs but will not deliver any water. Cause: Base (38) clogged. Solution: Remove the Screws (1) from the Base (38) and remove Base (38). Clean out dirt or debris and replace. Cause: When starting, the pump water height falls below the minimum water level. Solution: Submerge pump deeper.
NOTE: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 95267 Parts List Page 8 Description Float Switch Cable and Plug Under Washer Universal Adapter...
LIMITED 1 YEAR / 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that for a period of ninety days from date of purchase that the engine/motor, the belts (if so equipped), and the blades (if so equipped) are free of defects in materials and workmanship.
Need help?
Do you have a question about the PACIFIC HYDROSTAR 95267 and is the answer not in the manual?
Questions and answers