Epson Stylus C82 Service Manual page 34

EPSON Stylus C82
5. Follow the order below to remove ASF Trigger Lever from ASF Frame.
ASF Frame
1
2
ASF Trigger Lever
Figure 4-23. ASF Unit Disassembly 2
6. Follow the order below using a common screwdriver to release the Hopper (left
side) attachment from the ASF Frame, then remove the Hopper from the ASF
Frame.
Hook
Hopper
1
2
Figure 4-24. ASF Unit Disassembly 3
7. Allow the Compression Spring 2.9 to rotate to the left from the ASF Frame, then
remove it.
DISASSEMBLY AND ASSEMBLY
Extension spring 1.67
3
1'
2'
Hooks
4
3
8. While spreading the left side surface of the ASF Frame toward the outside, follow
the order shown below to remove LD Roller Shaft.
ASF Frame
Figure 4-25. ASF Unit Disassembly 4
9. Release Extension Spring 2.25 from hooks on ASF Frame and Retard Roller
Holder, then remove spring.
10. Pull the protrusion of the Retard Roller Holder fastened to the ASF Frame away
from the ASF Frame in the direction of the arrow for one side and then the other.
Then remove Retard Roller along with Retard Roller Holder.
Extension spring 2.25
Hook
Figure 4-26. ASF Unit Disassembly 5
Disassembly
Compression spring 2.9
LD Roller Shaft
1
3
2
Hook
Retard Roller Holder
<ASF Frame Bottom Surface>
Revision A
34