Cut Sheet Feeder Operating Principles - Epson LX-810 Technical Manual

3.2.2 Cut Sheet Feeder Operating Principles

The cut sheet feeder is driven by firmware incorporated in the printer. The feeder need not be
electronically connected to the printer.
Cut sheet feeder mode can be selected either by DIP
Selection by DIP switch
The cut sheet mode is selected by the DIP switch setting.
DIP Switch
2-2
Selection by comman'd
After the cut sheet feeder has been mounted on the printer, the following command can be used. "-'
Command:
Format:
NOTE: This command should be input when paper is loaded.
Table 3-5. DIP Switch Selection
Function
Cut Sheet Feeder M o d e
ESC EM
"n"
where "n" signifies the following
Cancels the CSF mode
Specifies the CSF mode
Ejects a sheet
3-8
switch or by command.
ON
Valid
OFF
Invalid
. .
. ,,, .