Table of Contents
Advertisement
Ambient conditions
The environment must meet the following conditions:
Operating environment
♦ Temperature: 50°F to 95°F (10°C to 35°C)
♦ Recommended temperature for assured printing accuracy: 61°F to 77°F (16°C to 25°C)
♦ Humidity: 35% - 80%, non-condensing
♦ Recommended humidity for assured printing accuracy: 50% to 60%
Storage environment
♦ Temperature: 14°F to 140°F (-10°C to 60°C)
♦ Humidity: 20% - 90% non-condensing
Variation rate
♦ Temperature: 4°F (2°C) per hour
♦ Humidity: 5% per hour
Important cautions
♦
Do not connect the printer to a power supply used by other devices that could interfere
with your printer.
♦
Do not use thinner, benzene or similar agents on the printer.
♦
Only use original Gerber ink cassettes. Use of different ink cassettes might cause damage
to your printer. When using non-Gerber ink cassettes, the ink supply system, the heads
and the cleaning system will be considered out of warranty.
♦
Keep ink cassettes out of the reach of children.
♦
The Gerber Jetster ink can freeze if you store your ink below -4°F (-18°C). Store your ink
cassettes in a cool place above the freezing point. If the ink freezes, leave your cassettes at
room temperature for at least three hours before using them.
♦
Protect your printer from moisture, dust, draughts and direct sunlight.
♦
It is best to keep your machine away from open windows and air-conditioners.
♦
Make sure that there is an adequate space around the printer so that ventilation is not
obstructed.
♦
Avoid using your Gerber Jetster printer near heating systems, such as stoves or heaters.
♦
Avoid using your printer under strong lighting, such as halogen lamps or light bulbs.
♦
When selecting a place for your printer, leave at least 3 feet (1 m) in front and at the sides,
and 3 feet (1 m) at the rear.
7
Advertisement
Table of Contents
