Unpacking Your Gerber Jetster Printer; What's In The Box - Gerber Jetster Owner's Manual

8 CHAPTER 2
Installing and Setting up the Gerber Jetster

Unpacking your Gerber Jetster printer

The printer body and Roll Take-up system are packed in two separate boxes. Unpack the
printer body first.
CAUTION: Four people are required to lift the machine out of the box. Protect the
printer from shocks. Do not dismantle the unit.
To unpack the printer
1 Remove the top cover cardboard and big sleeve.
2 Unpack the leg set, accessories box, extra media scroller,
and beams.
3 Open the printer body box.
4 Remove all plastic and cardboard pieces securing the
printer body.
5 Take out the media scroller
6 Determine if all of the parts described in the parts list are
included in the box. Consult your dealer if anything
seems to be missing.

What's in the box?

Note: The Jetster requires an IEEE 1284 compliant cable (maximum length of 15 feet
(157.2 cm)) that is not included in the shipment. You must supply the cable, which is readily
available at most computer stores.
Box contents
♦ Gerber Jetster printer unit
♦ Printer stand
♦ 2 media scrollers including plastic flanges in 2 sizes:
2"and 3"
♦ Scroller slip ring
♦ 1 Sheet-off knife, pre-installed in head
Accessories kit contents
♦ Power cable
♦ Gerber Jetster Owner's Guide
♦ Extra Box with Roll Take-Up System
♦ Set of Eco-solvent ink cassettes (6 cassettes)
♦ Set of Eco-solvent Transition Liquid cassettes (6 cassettes)