Table of Contents
Advertisement
2
CHAPTER 1
Introduction
In this manual
The following chapters introduce you to the Gerber Jetster, describe the printing process and
procedures, and show you how to maintain your printer for maximum quality output.
Installing and Setting up the Gerber Jetster directs you in unpacking and setting up the Gerber
Jetster and provides environmental recommendations.
Preparing the Job describes the loading and use of inks and media.
Printer Maintenance recommends cleaning and replacement of ink and cutting blades.
Understanding the Control Panel and Heater Controls provides details of the Gerber Jetster
menu structure and describes printer and heater controls.
Conventions
The following conventions are used in this addendum:
Tip: A tip contains valuable information that could make the task faster or easier.
Note: A note contains important information that could affect the successful completion of a
task.
CAUTION: A caution statement contains information which, if not observed, could
result in equipment damage.
WARNING: A warning statement contains information which, if not observed,
could result in personal injury.
Customer support
If you have questions regarding using, maintaining, or troubleshooting the Gerber Jetster please
contact your Gerber distributor, GSP Field Service for hardware questions, or Technical
Systems Support for software questions.
phone: 800-828-5406 for hardware, 860-644-6971 for software
fax: 860-648-8376
e-mail: gspservice@gspinc.com (hardware) or gsptech@gspinc.com (software)
www.gspinc.com
Additional sources of information
♦ Gerber FastFacts provides answers to technical and service questions. The telephone
number is 860-648-8040. FastFacts are also available on the web site under "Support."
♦ If you are a Support First member, use your toll-free assistance number (for more
information about Support First, call 860-644-6971).
Advertisement
Table of Contents
