Epson Stylus 1500 Service Manual page 109

Stylus 1500 Service Manual
Stylus 1500
Customer Data <********> 95/**/**
<< Menu 1 >>
Head Data Writing
————————-
Black Head Angle Adj.
Uni-D Adj.
Bi-D Adj.
Color Head Angle Adj.
Select : <Up> or <Down> Go : <SPACE> or <RETURN> Change menu : <1> or <2>
4. Move the cursor to the menu item "Destination Data Writing Only" to perform destination data writing
by pressing 1, 2, , and
5. Immediately after you press the SPACE and ENTER keys , the main menu disappears briefly and then
reappears. When this happens, each parameter, such as destination, interface mode, TOF value,
economy/condensed, etc., is stored to the EEPROM.)
5. Choose END by selecting it from the keyboard. Choose another selection if you want to continue in the
adjustment mode.
6. The following menu appears on the display. If you want end the program, press 5.
Stylus 1500 <********> Customer Data <********> 95/**/**
( Customer Data Input) .... 1
( Adjustment
( END
SELECT MENU
n
rThe settings are not stored permanently in the EEPROM until the printer is turned off.
Turn off the printer at once after adjustment.
rPerform the initial ink charge operation using the adjustment program before sending the unit
back to the customer.
7. Turn off the printer.
Rev.A
<<Menu 2>>
———————
Initial Black Ink Charging
Black - Color HV Adj.
———————
.
) .... 2
) .... 5
Color Ink Counter Rest
END
Destination Data Writing only
Head Gap Adj.
Adjustments
4-5