Duerkopp Adler 911 Fitting Instructions Manual page 14

3.5 Mounting the laser lamps(s) and the holder
3
Ausgabe/Edition:
Änderungsindex
05.2010
Rev. index: 00.0
Anbauanleitung für Laserleuchte
Teilesatz 0911 597524
Fitting Instruction for laser lamp
Kit 0911 597524
2 1
– Fix the bow 1 onto the L-bracket 2.
– Fix the L-bracket 2 using two screws M5 x 12 from the inside of
the cover face 3.
– Mount the face cover
– Fix the laser lamps(s) with the clamps 5 onto the bow 2.
– Fix the cables of the laser lamps(s) with cable ties onto bow 2.
– Run the cables 6 as shown in the pictures to the power supply
units.
6
– Connect the two wires 8 of the laser lamp cable to the socket 7
(output X2).
8
Printed in Germany
Teile-Nr./ Part-No.:
0791 911701
5 4 2
7
Blatt: von
Sheet: 14 from 16