Duerkopp Adler 911 Fitting Instructions Manual page 10

2.2 Kit 0510 590034 "Laser additional lamp complete"
Quantity Material-No.
1 9835 501004
1 0806 402670
1 0806 402680
3 0216 000103
3 Mounting the kit
3.1 Mounting the plate for the power supply units
2
Ausgabe/Edition:
Änderungsindex
05.2010
Rev. index: 00.0
Anbauanleitung für Laserleuchte
Teilesatz 0911 597524
Fitting Instruction for laser lamp
Kit 0911 597524
With each power supply unit up to 2 additional laser lamps can be
connected. The three laser lamps are then connected as a group.
To this end the kit 0510 590034 "Laser additional lamp complete"
is available.
The kit consists of the following components:
Designation
Laser complete
Clamp (on bow 0510 491010)
Clamp (in clamp 0806 402670)
Hexagonal nut M10 x 1 (1x lock clamp 1 on bow;
1x lock clamp 2 on clamp 1; 1x lock laser
on clamp 2).
Caution: Risk of injury!
Turn the main switch off!
Mount the kit only with the sewing unit switched off!
1
– Unscrew the cover 1 and 2.
– Unscrew the PCB 3 from the plate 4.
4
Printed in Germany
Teile-Nr./ Part-No.:
0791 911701
3
Blatt: von
Sheet: 10 from 16