Duerkopp Adler 911 Fitting Instructions Manual page 11

5
3.2 Mounting the power supply unit and the cord
Ausgabe/Edition: Änderungsindex
05.2010 Rev. index: 00.0
Anbauanleitung für Laserleuchte
Teilesatz 0911 597524
Fitting Instruction for laser lamp
Kit 0911 597524
4
– Screw the plate 5 for the PCBs using two countersunk screws
M4 x 16 and the two fixation sleeves onto the plate 4.
– Push for each power supply unit 4 distance pieces 6 into the
bore holes on plate 5.
– Press the PCB 3 also with distance pieces onto the plate 5.
8
– Press the power supply unit(s) 7 onto the distance pieces.
– Connect the cord 8 for the power supply to the input X1 of the
power supply unit 7.
7
Printed in Germany
Teile-Nr./ Part-No.:
0791 911701
6 3
Blatt: von
Sheet: 11 from 16