Duerkopp Adler 911 Fitting Instructions Manual page 12

3.3 Wiring and connecting the cable to the control unit
1
Ausgabe/Edition:
Änderungsindex
05.2010
Rev. index: 00.0
Anbauanleitung für Laserleuchte
Teilesatz 0911 597524
Fitting Instruction for laser lamp
Kit 0911 597524
– Run the cable 1 (as shown on the pictures) beneath the table
plate.
– Fix the cable 1 with cable ties onto the wiring harness 2.
– Plug the plug 3 of the cable into the socket X100t on the
control unit and fix it with the two screws.
3
Printed in Germany
Teile-Nr./ Part-No.:
0791 911701
2 1
Blatt: von
Sheet: 12 from 16